Interface - java.util.Map
Created by : Mr Dk.
2019 / 11 / 13 10:02
Nanjing, Jiangsu, China
Definition
public interface Map<K,V> {
}
建立从 key 到 value 的映射：map 中不能存在重复的 key，每个 key 只能最多对应一个值。
Map 接口提供了三个集合视角：
- key 的集合
- value 的集合
- key-value 映射的集合
Map 的顺序被定义为迭代器返回元素的顺序：
- TreeMap 保证特定的顺序
- HashMap 不保证顺序
需要注意的是可变对象作为 key 的情况：如果对象变化导致 equals() 和 hashcode() 的行为发生变化，map 的行为未知。
所有的 Map 实现都应当提供 空构造函数 和 拷贝构造函数。不同的集合实现对于 null key 等有各自的限制。
/**
* An object that maps keys to values. A map cannot contain duplicate keys;
* each key can map to at most one value.
*
* <p>This interface takes the place of the <tt>Dictionary</tt> class, which
* was a totally abstract class rather than an interface.
*
* <p>The <tt>Map</tt> interface provides three <i>collection views</i>, which
* allow a map's contents to be viewed as a set of keys, collection of values,
* or set of key-value mappings. The <i>order</i> of a map is defined as
* the order in which the iterators on the map's collection views return their
* elements. Some map implementations, like the <tt>TreeMap</tt> class, make
* specific guarantees as to their order; others, like the <tt>HashMap</tt>
* class, do not.
*
* <p>Note: great care must be exercised if mutable objects are used as map
* keys. The behavior of a map is not specified if the value of an object is
* changed in a manner that affects <tt>equals</tt> comparisons while the
* object is a key in the map. A special case of this prohibition is that it
* is not permissible for a map to contain itself as a key. While it is
* permissible for a map to contain itself as a value, extreme caution is
* advised: the <tt>equals</tt> and <tt>hashCode</tt> methods are no longer
* well defined on such a map.
*
* <p>All general-purpose map implementation classes should provide two
* "standard" constructors: a void (no arguments) constructor which creates an
* empty map, and a constructor with a single argument of type <tt>Map</tt>,
* which creates a new map with the same key-value mappings as its argument.
* In effect, the latter constructor allows the user to copy any map,
* producing an equivalent map of the desired class. There is no way to
* enforce this recommendation (as interfaces cannot contain constructors) but
* all of the general-purpose map implementations in the JDK comply.
*
* <p>The "destructive" methods contained in this interface, that is, the
* methods that modify the map on which they operate, are specified to throw
* <tt>UnsupportedOperationException</tt> if this map does not support the
* operation. If this is the case, these methods may, but are not required
* to, throw an <tt>UnsupportedOperationException</tt> if the invocation would
* have no effect on the map. For example, invoking the {@link #putAll(Map)}
* method on an unmodifiable map may, but is not required to, throw the
* exception if the map whose mappings are to be "superimposed" is empty.
*
* <p>Some map implementations have restrictions on the keys and values they
* may contain. For example, some implementations prohibit null keys and
* values, and some have restrictions on the types of their keys. Attempting
* to insert an ineligible key or value throws an unchecked exception,
* typically <tt>NullPointerException</tt> or <tt>ClassCastException</tt>.
* Attempting to query the presence of an ineligible key or value may throw an
* exception, or it may simply return false; some implementations will exhibit
* the former behavior and some will exhibit the latter. More generally,
* attempting an operation on an ineligible key or value whose completion
* would not result in the insertion of an ineligible element into the map may
* throw an exception or it may succeed, at the option of the implementation.
* Such exceptions are marked as "optional" in the specification for this
* interface.
*
* <p>Many methods in Collections Framework interfaces are defined
* in terms of the {@link Object#equals(Object) equals} method. For
* example, the specification for the {@link #containsKey(Object)
* containsKey(Object key)} method says: "returns <tt>true</tt> if and
* only if this map contains a mapping for a key <tt>k</tt> such that
* <tt>(key==null ? k==null : key.equals(k))</tt>." This specification should
* <i>not</i> be construed to imply that invoking <tt>Map.containsKey</tt>
* with a non-null argument <tt>key</tt> will cause <tt>key.equals(k)</tt> to
* be invoked for any key <tt>k</tt>. Implementations are free to
* implement optimizations whereby the <tt>equals</tt> invocation is avoided,
* for example, by first comparing the hash codes of the two keys. (The
* {@link Object#hashCode()} specification guarantees that two objects with
* unequal hash codes cannot be equal.) More generally, implementations of
* the various Collections Framework interfaces are free to take advantage of
* the specified behavior of underlying {@link Object} methods wherever the
* implementor deems it appropriate.
*
* <p>Some map operations which perform recursive traversal of the map may fail
* with an exception for self-referential instances where the map directly or
* indirectly contains itself. This includes the {@code clone()},
* {@code equals()}, {@code hashCode()} and {@code toString()} methods.
* Implementations may optionally handle the self-referential scenario, however
* most current implementations do not do so.
*
* <p>This interface is a member of the
* <a href="{@docRoot}/../technotes/guides/collections/index.html">
* Java Collections Framework</a>.
*
* @param <K> the type of keys maintained by this map
* @param <V> the type of mapped values
*
* @author Josh Bloch
* @see HashMap
* @see TreeMap
* @see Hashtable
* @see SortedMap
* @see Collection
* @see Set
* @since 1.2
*/
Size
/**
* Returns the number of key-value mappings in this map. If the
* map contains more than <tt>Integer.MAX_VALUE</tt> elements, returns
* <tt>Integer.MAX_VALUE</tt>.
*
* @return the number of key-value mappings in this map
*/
int size();
/**
* Returns <tt>true</tt> if this map contains no key-value mappings.
*
* @return <tt>true</tt> if this map contains no key-value mappings
*/
boolean isEmpty();
Contains
Map 中是否包含特定的 key 或 value？
key==null ? k==null : key.equals(k)value==null ? v==null : value.equals(v)
/**
* Returns <tt>true</tt> if this map contains a mapping for the specified
* key. More formally, returns <tt>true</tt> if and only if
* this map contains a mapping for a key <tt>k</tt> such that
* <tt>(key==null ? k==null : key.equals(k))</tt>. (There can be
* at most one such mapping.)
*
* @param key key whose presence in this map is to be tested
* @return <tt>true</tt> if this map contains a mapping for the specified
* key
* @throws ClassCastException if the key is of an inappropriate type for
* this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key is null and this map
* does not permit null keys
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
*/
boolean containsKey(Object key);
/**
* Returns <tt>true</tt> if this map maps one or more keys to the
* specified value. More formally, returns <tt>true</tt> if and only if
* this map contains at least one mapping to a value <tt>v</tt> such that
* <tt>(value==null ? v==null : value.equals(v))</tt>. This operation
* will probably require time linear in the map size for most
* implementations of the <tt>Map</tt> interface.
*
* @param value value whose presence in this map is to be tested
* @return <tt>true</tt> if this map maps one or more keys to the
* specified value
* @throws ClassCastException if the value is of an inappropriate type for
* this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified value is null and this
* map does not permit null values
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
*/
boolean containsValue(Object value);
Get
取指定 key 对应的 value，如果 key 不存在，则返回 null。但有些集合实现允许 value 的值为空，所以返回 null 不一定意味着 key 不存在。
/**
* Returns the value to which the specified key is mapped,
* or {@code null} if this map contains no mapping for the key.
*
* <p>More formally, if this map contains a mapping from a key
* {@code k} to a value {@code v} such that {@code (key==null ? k==null :
* key.equals(k))}, then this method returns {@code v}; otherwise
* it returns {@code null}. (There can be at most one such mapping.)
*
* <p>If this map permits null values, then a return value of
* {@code null} does not <i>necessarily</i> indicate that the map
* contains no mapping for the key; it's also possible that the map
* explicitly maps the key to {@code null}. The {@link #containsKey
* containsKey} operation may be used to distinguish these two cases.
*
* @param key the key whose associated value is to be returned
* @return the value to which the specified key is mapped, or
* {@code null} if this map contains no mapping for the key
* @throws ClassCastException if the key is of an inappropriate type for
* this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key is null and this map
* does not permit null keys
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
*/
V get(Object key);
Put
将一个 key 与 value 相关联，并放入 Map：
- 如果 map 之前已经存在该 key 的关联，则替代并返回旧的 value
- 如果没有，则返回
null
/**
* Associates the specified value with the specified key in this map
* (optional operation). If the map previously contained a mapping for
* the key, the old value is replaced by the specified value. (A map
* <tt>m</tt> is said to contain a mapping for a key <tt>k</tt> if and only
* if {@link #containsKey(Object) m.containsKey(k)} would return
* <tt>true</tt>.)
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with <tt>key</tt>, or
* <tt>null</tt> if there was no mapping for <tt>key</tt>.
* (A <tt>null</tt> return can also indicate that the map
* previously associated <tt>null</tt> with <tt>key</tt>,
* if the implementation supports <tt>null</tt> values.)
* @throws UnsupportedOperationException if the <tt>put</tt> operation
* is not supported by this map
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* @throws NullPointerException if the specified key or value is null
* and this map does not permit null keys or values
* @throws IllegalArgumentException if some property of the specified key
* or value prevents it from being stored in this map
*/
V put(K key, V value);
Remove
移除指定的 key 对应的 value 并返回。如果没有 key 对应的 value，则返回 null。
/**
* Removes the mapping for a key from this map if it is present
* (optional operation). More formally, if this map contains a mapping
* from key <tt>k</tt> to value <tt>v</tt> such that
* <code>(key==null ? k==null : key.equals(k))</code>, that mapping
* is removed. (The map can contain at most one such mapping.)
*
* <p>Returns the value to which this map previously associated the key,
* or <tt>null</tt> if the map contained no mapping for the key.
*
* <p>If this map permits null values, then a return value of
* <tt>null</tt> does not <i>necessarily</i> indicate that the map
* contained no mapping for the key; it's also possible that the map
* explicitly mapped the key to <tt>null</tt>.
*
* <p>The map will not contain a mapping for the specified key once the
* call returns.
*
* @param key key whose mapping is to be removed from the map
* @return the previous value associated with <tt>key</tt>, or
* <tt>null</tt> if there was no mapping for <tt>key</tt>.
* @throws UnsupportedOperationException if the <tt>remove</tt> operation
* is not supported by this map
* @throws ClassCastException if the key is of an inappropriate type for
* this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key is null and this
* map does not permit null keys
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
*/
V remove(Object key);
集合视角
这个集合会在 Map 内部被维护，在迭代该集合的过程中对 Map 进行修改，行为未知。除非用迭代器自己的 remove() 函数。
/**
* Returns a {@link Set} view of the keys contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own <tt>remove</tt> operation), the results of
* the iteration are undefined. The set supports element removal,
* which removes the corresponding mapping from the map, via the
* <tt>Iterator.remove</tt>, <tt>Set.remove</tt>,
* <tt>removeAll</tt>, <tt>retainAll</tt>, and <tt>clear</tt>
* operations. It does not support the <tt>add</tt> or <tt>addAll</tt>
* operations.
*
* @return a set view of the keys contained in this map
*/
Set<K> keySet();
同上，这个集合也会在 Map 中被维护。
/**
* Returns a {@link Collection} view of the values contained in this map.
* The collection is backed by the map, so changes to the map are
* reflected in the collection, and vice-versa. If the map is
* modified while an iteration over the collection is in progress
* (except through the iterator's own <tt>remove</tt> operation),
* the results of the iteration are undefined. The collection
* supports element removal, which removes the corresponding
* mapping from the map, via the <tt>Iterator.remove</tt>,
* <tt>Collection.remove</tt>, <tt>removeAll</tt>,
* <tt>retainAll</tt> and <tt>clear</tt> operations. It does not
* support the <tt>add</tt> or <tt>addAll</tt> operations.
*
* @return a collection view of the values contained in this map
*/
Collection<V> values();
这个集合也会被内部维护？
/**
* Returns a {@link Set} view of the mappings contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own <tt>remove</tt> operation, or through the
* <tt>setValue</tt> operation on a map entry returned by the
* iterator) the results of the iteration are undefined. The set
* supports element removal, which removes the corresponding
* mapping from the map, via the <tt>Iterator.remove</tt>,
* <tt>Set.remove</tt>, <tt>removeAll</tt>, <tt>retainAll</tt> and
* <tt>clear</tt> operations. It does not support the
* <tt>add</tt> or <tt>addAll</tt> operations.
*
* @return a set view of the mappings contained in this map
*/
Set<Map.Entry<K, V>> entrySet();
Entry
内部定义的子接口 Entry<K,V>。可以从 Entry 中提取 key 和 value，也支持设置某个 key 对应的 value。
/**
* A map entry (key-value pair). The <tt>Map.entrySet</tt> method returns
* a collection-view of the map, whose elements are of this class. The
* <i>only</i> way to obtain a reference to a map entry is from the
* iterator of this collection-view. These <tt>Map.Entry</tt> objects are
* valid <i>only</i> for the duration of the iteration; more formally,
* the behavior of a map entry is undefined if the backing map has been
* modified after the entry was returned by the iterator, except through
* the <tt>setValue</tt> operation on the map entry.
*
* @see Map#entrySet()
* @since 1.2
*/
interface Entry<K,V> {
/**
* Returns the key corresponding to this entry.
*
* @return the key corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
K getKey();
/**
* Returns the value corresponding to this entry. If the mapping
* has been removed from the backing map (by the iterator's
* <tt>remove</tt> operation), the results of this call are undefined.
*
* @return the value corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V getValue();
/**
* Replaces the value corresponding to this entry with the specified
* value (optional operation). (Writes through to the map.) The
* behavior of this call is undefined if the mapping has already been
* removed from the map (by the iterator's <tt>remove</tt> operation).
*
* @param value new value to be stored in this entry
* @return old value corresponding to the entry
* @throws UnsupportedOperationException if the <tt>put</tt> operation
* is not supported by the backing map
* @throws ClassCastException if the class of the specified value
* prevents it from being stored in the backing map
* @throws NullPointerException if the backing map does not permit
* null values, and the specified value is null
* @throws IllegalArgumentException if some property of this value
* prevents it from being stored in the backing map
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V setValue(V value);
/**
* Compares the specified object with this entry for equality.
* Returns <tt>true</tt> if the given object is also a map entry and
* the two entries represent the same mapping. More formally, two
* entries <tt>e1</tt> and <tt>e2</tt> represent the same mapping
* if<pre>
* (e1.getKey()==null ?
* e2.getKey()==null : e1.getKey().equals(e2.getKey())) &&
* (e1.getValue()==null ?
* e2.getValue()==null : e1.getValue().equals(e2.getValue()))
* </pre>
* This ensures that the <tt>equals</tt> method works properly across
* different implementations of the <tt>Map.Entry</tt> interface.
*
* @param o object to be compared for equality with this map entry
* @return <tt>true</tt> if the specified object is equal to this map
* entry
*/
boolean equals(Object o);
/**
* Returns the hash code value for this map entry. The hash code
* of a map entry <tt>e</tt> is defined to be: <pre>
* (e.getKey()==null ? 0 : e.getKey().hashCode()) ^
* (e.getValue()==null ? 0 : e.getValue().hashCode())
* </pre>
* This ensures that <tt>e1.equals(e2)</tt> implies that
* <tt>e1.hashCode()==e2.hashCode()</tt> for any two Entries
* <tt>e1</tt> and <tt>e2</tt>, as required by the general
* contract of <tt>Object.hashCode</tt>.
*
* @return the hash code value for this map entry
* @see Object#hashCode()
* @see Object#equals(Object)
* @see #equals(Object)
*/
int hashCode();
/**
* Returns a comparator that compares {@link Map.Entry} in natural order on key.
*
* <p>The returned comparator is serializable and throws {@link
* NullPointerException} when comparing an entry with a null key.
*
* @param <K> the {@link Comparable} type of then map keys
* @param <V> the type of the map values
* @return a comparator that compares {@link Map.Entry} in natural order on key.
* @see Comparable
* @since 1.8
*/
public static <K extends Comparable<? super K>, V> Comparator<Map.Entry<K,V>> comparingByKey() {
return (Comparator<Map.Entry<K, V>> & Serializable)
(c1, c2) -> c1.getKey().compareTo(c2.getKey());
}
/**
* Returns a comparator that compares {@link Map.Entry} in natural order on value.
*
* <p>The returned comparator is serializable and throws {@link
* NullPointerException} when comparing an entry with null values.
*
* @param <K> the type of the map keys
* @param <V> the {@link Comparable} type of the map values
* @return a comparator that compares {@link Map.Entry} in natural order on value.
* @see Comparable
* @since 1.8
*/
public static <K, V extends Comparable<? super V>> Comparator<Map.Entry<K,V>> comparingByValue() {
return (Comparator<Map.Entry<K, V>> & Serializable)
(c1, c2) -> c1.getValue().compareTo(c2.getValue());
}
/**
* Returns a comparator that compares {@link Map.Entry} by key using the given
* {@link Comparator}.
*
* <p>The returned comparator is serializable if the specified comparator
* is also serializable.
*
* @param <K> the type of the map keys
* @param <V> the type of the map values
* @param cmp the key {@link Comparator}
* @return a comparator that compares {@link Map.Entry} by the key.
* @since 1.8
*/
public static <K, V> Comparator<Map.Entry<K, V>> comparingByKey(Comparator<? super K> cmp) {
Objects.requireNonNull(cmp);
return (Comparator<Map.Entry<K, V>> & Serializable)
(c1, c2) -> cmp.compare(c1.getKey(), c2.getKey());
}
/**
* Returns a comparator that compares {@link Map.Entry} by value using the given
* {@link Comparator}.
*
* <p>The returned comparator is serializable if the specified comparator
* is also serializable.
*
* @param <K> the type of the map keys
* @param <V> the type of the map values
* @param cmp the value {@link Comparator}
* @return a comparator that compares {@link Map.Entry} by the value.
* @since 1.8
*/
public static <K, V> Comparator<Map.Entry<K, V>> comparingByValue(Comparator<? super V> cmp) {
Objects.requireNonNull(cmp);
return (Comparator<Map.Entry<K, V>> & Serializable)
(c1, c2) -> cmp.compare(c1.getValue(), c2.getValue());
}
}
Get or Default
返回 key 映射的 value。如果 key 的映射不存在，那么返回一个默认值。
/**
* Returns the value to which the specified key is mapped, or
* {@code defaultValue} if this map contains no mapping for the key.
*
* @implSpec
* The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param key the key whose associated value is to be returned
* @param defaultValue the default mapping of the key
* @return the value to which the specified key is mapped, or
* {@code defaultValue} if this map contains no mapping for the key
* @throws ClassCastException if the key is of an inappropriate type for
* this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key is null and this map
* does not permit null keys
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default V getOrDefault(Object key, V defaultValue) {
V v;
return (((v = get(key)) != null) || containsKey(key))
? v
: defaultValue;
}
For Each
以迭代器迭代 entrySet() 的顺序对 entry 进行 action 操作，直到迭代完毕或抛出异常。不保证同步性。
/**
* Performs the given action for each entry in this map until all entries
* have been processed or the action throws an exception. Unless
* otherwise specified by the implementing class, actions are performed in
* the order of entry set iteration (if an iteration order is specified.)
* Exceptions thrown by the action are relayed to the caller.
*
* @implSpec
* The default implementation is equivalent to, for this {@code map}:
* <pre> {@code
* for (Map.Entry<K, V> entry : map.entrySet())
* action.accept(entry.getKey(), entry.getValue());
* }</pre>
*
* The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param action The action to be performed for each entry
* @throws NullPointerException if the specified action is null
* @throws ConcurrentModificationException if an entry is found to be
* removed during iteration
* @since 1.8
*/
default void forEach(BiConsumer<? super K, ? super V> action) {
Objects.requireNonNull(action);
for (Map.Entry<K, V> entry : entrySet()) {
K k;
V v;
try {
k = entry.getKey();
v = entry.getValue();
} catch(IllegalStateException ise) {
// this usually means the entry is no longer in the map.
throw new ConcurrentModificationException(ise);
}
action.accept(k, v);
}
}
Replace All
根据 entrySet() 的遍历顺序，对每个 value 应用指定的函数后，将新的 value 代替旧的 value。
/**
* Replaces each entry's value with the result of invoking the given
* function on that entry until all entries have been processed or the
* function throws an exception. Exceptions thrown by the function are
* relayed to the caller.
*
* @implSpec
* <p>The default implementation is equivalent to, for this {@code map}:
* <pre> {@code
* for (Map.Entry<K, V> entry : map.entrySet())
* entry.setValue(function.apply(entry.getKey(), entry.getValue()));
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param function the function to apply to each entry
* @throws UnsupportedOperationException if the {@code set} operation
* is not supported by this map's entry set iterator.
* @throws ClassCastException if the class of a replacement value
* prevents it from being stored in this map
* @throws NullPointerException if the specified function is null, or the
* specified replacement value is null, and this map does not permit null
* values
* @throws ClassCastException if a replacement value is of an inappropriate
* type for this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if function or a replacement value is null,
* and this map does not permit null keys or values
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws IllegalArgumentException if some property of a replacement value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ConcurrentModificationException if an entry is found to be
* removed during iteration
* @since 1.8
*/
default void replaceAll(BiFunction<? super K, ? super V, ? extends V> function) {
Objects.requireNonNull(function);
for (Map.Entry<K, V> entry : entrySet()) {
K k;
V v;
try {
k = entry.getKey();
v = entry.getValue();
} catch(IllegalStateException ise) {
// this usually means the entry is no longer in the map.
throw new ConcurrentModificationException(ise);
}
// ise thrown from function is not a cme.
v = function.apply(k, v);
try {
entry.setValue(v);
} catch(IllegalStateException ise) {
// this usually means the entry is no longer in the map.
throw new ConcurrentModificationException(ise);
}
}
}
Put if Absent
如果指定的 key 在映射中不存在，或 key 存在但是对应的 value 为 null，就用新的 value 覆盖并返回 null；否则返回原有的非 null 值。
/**
* If the specified key is not already associated with a value (or is mapped
* to {@code null}) associates it with the given value and returns
* {@code null}, else returns the current value.
*
* @implSpec
* The default implementation is equivalent to, for this {@code
* map}:
*
* <pre> {@code
* V v = map.get(key);
* if (v == null)
* v = map.put(key, value);
*
* return v;
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with the specified key, or
* {@code null} if there was no mapping for the key.
* (A {@code null} return can also indicate that the map
* previously associated {@code null} with the key,
* if the implementation supports null values.)
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the key or value is of an inappropriate
* type for this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key or value is null,
* and this map does not permit null keys or values
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws IllegalArgumentException if some property of the specified key
* or value prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default V putIfAbsent(K key, V value) {
V v = get(key);
if (v == null) {
v = put(key, value);
}
return v;
}
Remove
当且仅当指定的 key 对应于指定的 value 时，删除 entry。
/**
* Removes the entry for the specified key only if it is currently
* mapped to the specified value.
*
* @implSpec
* The default implementation is equivalent to, for this {@code map}:
*
* <pre> {@code
* if (map.containsKey(key) && Objects.equals(map.get(key), value)) {
* map.remove(key);
* return true;
* } else
* return false;
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param key key with which the specified value is associated
* @param value value expected to be associated with the specified key
* @return {@code true} if the value was removed
* @throws UnsupportedOperationException if the {@code remove} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the key or value is of an inappropriate
* type for this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key or value is null,
* and this map does not permit null keys or values
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default boolean remove(Object key, Object value) {
Object curValue = get(key);
if (!Objects.equals(curValue, value) ||
(curValue == null && !containsKey(key))) {
return false;
}
remove(key);
return true;
}
Replace
当且仅当指定的 key 映射到指定的 value (oldValue) 时，将 oldValue 替换为 newValue。
/**
* Replaces the entry for the specified key only if currently
* mapped to the specified value.
*
* @implSpec
* The default implementation is equivalent to, for this {@code map}:
*
* <pre> {@code
* if (map.containsKey(key) && Objects.equals(map.get(key), value)) {
* map.put(key, newValue);
* return true;
* } else
* return false;
* }</pre>
*
* The default implementation does not throw NullPointerException
* for maps that do not support null values if oldValue is null unless
* newValue is also null.
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param key key with which the specified value is associated
* @param oldValue value expected to be associated with the specified key
* @param newValue value to be associated with the specified key
* @return {@code true} if the value was replaced
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of a specified key or value
* prevents it from being stored in this map
* @throws NullPointerException if a specified key or newValue is null,
* and this map does not permit null keys or values
* @throws NullPointerException if oldValue is null and this map does not
* permit null values
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws IllegalArgumentException if some property of a specified key
* or value prevents it from being stored in this map
* @since 1.8
*/
default boolean replace(K key, V oldValue, V newValue) {
Object curValue = get(key);
if (!Objects.equals(curValue, oldValue) ||
(curValue == null && !containsKey(key))) {
return false;
}
put(key, newValue);
return true;
}
当且仅当指定的 key 存在映射时，用 value 替换旧的 value：
/**
* Replaces the entry for the specified key only if it is
* currently mapped to some value.
*
* @implSpec
* The default implementation is equivalent to, for this {@code map}:
*
* <pre> {@code
* if (map.containsKey(key)) {
* return map.put(key, value);
* } else
* return null;
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties.
*
* @param key key with which the specified value is associated
* @param value value to be associated with the specified key
* @return the previous value associated with the specified key, or
* {@code null} if there was no mapping for the key.
* (A {@code null} return can also indicate that the map
* previously associated {@code null} with the key,
* if the implementation supports null values.)
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key or value is null,
* and this map does not permit null keys or values
* @throws IllegalArgumentException if some property of the specified key
* or value prevents it from being stored in this map
* @since 1.8
*/
default V replace(K key, V value) {
V curValue;
if (((curValue = get(key)) != null) || containsKey(key)) {
curValue = put(key, value);
}
return curValue;
}
Compute
如果 key 的映射不存在，或对应的 value 为 null，就利用 key 和 mappingFunction 计算一个非空的新 value，并加入映射。
/**
* If the specified key is not already associated with a value (or is mapped
* to {@code null}), attempts to compute its value using the given mapping
* function and enters it into this map unless {@code null}.
*
* <p>If the function returns {@code null} no mapping is recorded. If
* the function itself throws an (unchecked) exception, the
* exception is rethrown, and no mapping is recorded. The most
* common usage is to construct a new object serving as an initial
* mapped value or memoized result, as in:
*
* <pre> {@code
* map.computeIfAbsent(key, k -> new Value(f(k)));
* }</pre>
*
* <p>Or to implement a multi-value map, {@code Map<K,Collection<V>>},
* supporting multiple values per key:
*
* <pre> {@code
* map.computeIfAbsent(key, k -> new HashSet<V>()).add(v);
* }</pre>
*
*
* @implSpec
* The default implementation is equivalent to the following steps for this
* {@code map}, then returning the current value or {@code null} if now
* absent:
*
* <pre> {@code
* if (map.get(key) == null) {
* V newValue = mappingFunction.apply(key);
* if (newValue != null)
* map.put(key, newValue);
* }
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties. In particular, all implementations of
* subinterface {@link java.util.concurrent.ConcurrentMap} must document
* whether the function is applied once atomically only if the value is not
* present.
*
* @param key key with which the specified value is to be associated
* @param mappingFunction the function to compute a value
* @return the current (existing or computed) value associated with
* the specified key, or null if the computed value is null
* @throws NullPointerException if the specified key is null and
* this map does not support null keys, or the mappingFunction
* is null
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default V computeIfAbsent(K key,
Function<? super K, ? extends V> mappingFunction) {
Objects.requireNonNull(mappingFunction);
V v;
if ((v = get(key)) == null) {
V newValue;
if ((newValue = mappingFunction.apply(key)) != null) {
put(key, newValue);
return newValue;
}
}
return v;
}
针对指定的 key，Map 中已经存在非空映射，利用 remappingFunction 对 key 和 oldValue 进行计算。如果计算出的新 value 非空，则替代旧 value；如果为空，就将现有的映射删除。
/**
* If the value for the specified key is present and non-null, attempts to
* compute a new mapping given the key and its current mapped value.
*
* <p>If the function returns {@code null}, the mapping is removed. If the
* function itself throws an (unchecked) exception, the exception is
* rethrown, and the current mapping is left unchanged.
*
* @implSpec
* The default implementation is equivalent to performing the following
* steps for this {@code map}, then returning the current value or
* {@code null} if now absent:
*
* <pre> {@code
* if (map.get(key) != null) {
* V oldValue = map.get(key);
* V newValue = remappingFunction.apply(key, oldValue);
* if (newValue != null)
* map.put(key, newValue);
* else
* map.remove(key);
* }
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties. In particular, all implementations of
* subinterface {@link java.util.concurrent.ConcurrentMap} must document
* whether the function is applied once atomically only if the value is not
* present.
*
* @param key key with which the specified value is to be associated
* @param remappingFunction the function to compute a value
* @return the new value associated with the specified key, or null if none
* @throws NullPointerException if the specified key is null and
* this map does not support null keys, or the
* remappingFunction is null
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default V computeIfPresent(K key,
BiFunction<? super K, ? super V, ? extends V> remappingFunction) {
Objects.requireNonNull(remappingFunction);
V oldValue;
if ((oldValue = get(key)) != null) {
V newValue = remappingFunction.apply(key, oldValue);
if (newValue != null) {
put(key, newValue);
return newValue;
} else {
remove(key);
return null;
}
} else {
return null;
}
}
对每一个指定的 key 及其旧的 value（或不存在 key 的映射而为 null），利用 remappingFunction 计算新 value。如果新 value 不为 null，就将其替代旧 value 或 null；否则就删除原有 key 的映射。
/**
* Attempts to compute a mapping for the specified key and its current
* mapped value (or {@code null} if there is no current mapping). For
* example, to either create or append a {@code String} msg to a value
* mapping:
*
* <pre> {@code
* map.compute(key, (k, v) -> (v == null) ? msg : v.concat(msg))}</pre>
* (Method {@link #merge merge()} is often simpler to use for such purposes.)
*
* <p>If the function returns {@code null}, the mapping is removed (or
* remains absent if initially absent). If the function itself throws an
* (unchecked) exception, the exception is rethrown, and the current mapping
* is left unchanged.
*
* @implSpec
* The default implementation is equivalent to performing the following
* steps for this {@code map}, then returning the current value or
* {@code null} if absent:
*
* <pre> {@code
* V oldValue = map.get(key);
* V newValue = remappingFunction.apply(key, oldValue);
* if (oldValue != null ) {
* if (newValue != null)
* map.put(key, newValue);
* else
* map.remove(key);
* } else {
* if (newValue != null)
* map.put(key, newValue);
* else
* return null;
* }
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties. In particular, all implementations of
* subinterface {@link java.util.concurrent.ConcurrentMap} must document
* whether the function is applied once atomically only if the value is not
* present.
*
* @param key key with which the specified value is to be associated
* @param remappingFunction the function to compute a value
* @return the new value associated with the specified key, or null if none
* @throws NullPointerException if the specified key is null and
* this map does not support null keys, or the
* remappingFunction is null
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @since 1.8
*/
default V compute(K key,
BiFunction<? super K, ? super V, ? extends V> remappingFunction) {
Objects.requireNonNull(remappingFunction);
V oldValue = get(key);
V newValue = remappingFunction.apply(key, oldValue);
if (newValue == null) {
// delete mapping
if (oldValue != null || containsKey(key)) {
// something to remove
remove(key);
return null;
} else {
// nothing to do. Leave things as they were.
return null;
}
} else {
// add or replace old mapping
put(key, newValue);
return newValue;
}
}
Merge
对于每一个指定的 key，如果映射不存在，或映射到的 value 为 null，就映射一个非空的默认值；对于映射 value 非空的 key，利用 remappingFunction 计算新 value。
- 如果新 value 为空，就删除映射
- 如果新 value 不为空，就替代旧 value
/**
* If the specified key is not already associated with a value or is
* associated with null, associates it with the given non-null value.
* Otherwise, replaces the associated value with the results of the given
* remapping function, or removes if the result is {@code null}. This
* method may be of use when combining multiple mapped values for a key.
* For example, to either create or append a {@code String msg} to a
* value mapping:
*
* <pre> {@code
* map.merge(key, msg, String::concat)
* }</pre>
*
* <p>If the function returns {@code null} the mapping is removed. If the
* function itself throws an (unchecked) exception, the exception is
* rethrown, and the current mapping is left unchanged.
*
* @implSpec
* The default implementation is equivalent to performing the following
* steps for this {@code map}, then returning the current value or
* {@code null} if absent:
*
* <pre> {@code
* V oldValue = map.get(key);
* V newValue = (oldValue == null) ? value :
* remappingFunction.apply(oldValue, value);
* if (newValue == null)
* map.remove(key);
* else
* map.put(key, newValue);
* }</pre>
*
* <p>The default implementation makes no guarantees about synchronization
* or atomicity properties of this method. Any implementation providing
* atomicity guarantees must override this method and document its
* concurrency properties. In particular, all implementations of
* subinterface {@link java.util.concurrent.ConcurrentMap} must document
* whether the function is applied once atomically only if the value is not
* present.
*
* @param key key with which the resulting value is to be associated
* @param value the non-null value to be merged with the existing value
* associated with the key or, if no existing value or a null value
* is associated with the key, to be associated with the key
* @param remappingFunction the function to recompute a value if present
* @return the new value associated with the specified key, or null if no
* value is associated with the key
* @throws UnsupportedOperationException if the {@code put} operation
* is not supported by this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* (<a href="{@docRoot}/java/util/Collection.html#optional-restrictions">optional</a>)
* @throws NullPointerException if the specified key is null and this map
* does not support null keys or the value or remappingFunction is
* null
* @since 1.8
*/
default V merge(K key, V value,
BiFunction<? super V, ? super V, ? extends V> remappingFunction) {
Objects.requireNonNull(remappingFunction);
Objects.requireNonNull(value);
V oldValue = get(key);
V newValue = (oldValue == null) ? value :
remappingFunction.apply(oldValue, value);
if(newValue == null) {
remove(key);
} else {
put(key, newValue);
}
return newValue;
}